Backflow Testing & Repair in Southern Maine

Safeguard your water

Backflow Prevention

A backflow preventer is a safety device that works like a one-way gate for your water. Its job is to keep contaminated water from flowing back into your drinking water, which is why annual backflow preventer testing is required by law.

We test backflow preventers and file the results, and we repair, swap out, or install new devices when needed. We'll provide the documentation you need for your records and help you stay compliant with local regulations.

What we do:

  • Annual backflow preventer testing and filing of results
  • Backflow preventer repairs
  • Swap-outs of existing devices
  • New backflow preventer installations
  • Relocating backflow preventer devices
  • Backflow preventer removal or install for seasonal homes

An approved backflow tester for local water districts

Agamenticus Plumbing & Heating is on the approved backflow tester lists for the York Water District and the Kennebunk, Kennebunkport & Wells Water District. We also test backflow preventers for Kittery Water District customers in Kittery and Eliot.

When is my backflow test due?

Testing and filing of results are due every year. The due date depends on your water district:

York Water District: June 30
Kittery Water District (Kittery and Eliot): December 31
Kennebunk, Kennebunkport & Wells Water District (Kennebunk, Ogunquit, and Wells): generally a date in June, sent by letter to each customer with a device

Got a testing notice?

Send it our way when you book. We'll take a look at the device at your property, schedule the test, and handle any repairs it needs.

Inside or outside? Relocating your backflow preventer

Some clients like their device inside, out of the elements. However, some devices can discharge a large volume of water from their relief valve, and every device needs room around it for testing, so the best spot depends on how your property is used. We can relocate an existing backflow preventer and help you weigh the pros and cons.

Answers to

Common Questions

A backflow preventer is a safety device installed in your plumbing system that acts like a one-way gate for your water. Its main job, an important one, is to protect your drinking water from contamination, which is why annual backflow preventer testing is required by law.  

We can:

  • Schedule your annual test
  • Provide necessary documentation for your records
  • Make any required repairs
  • Help you stay compliant with local regulations
  • Help protect your family’s drinking water

Every year. We schedule the test, file the results, and handle any repairs or replacement the device needs.

It depends on your water district: June 30 for the York Water District, December 31 for the Kittery Water District (Kittery and Eliot), and generally a date in June for the Kennebunk, Kennebunkport & Wells Water District, which is sent by letter to each customer with a device.

Yes. Let us know what else you need when you book, and we can plan the visit around it.

Indoor: pros

  • Freeze protection. This is the biggest advantage in cold climates. A frozen device can crack, leak, or take out your water service.
  • Less vandalism and theft. Brass assemblies are a known theft target, and indoors there’s no damage from vehicles or landscaping.
  • Cleaner look. Nothing sits in front of the building.

Indoor: cons

  • Discharge and flood risk. An RPZ-type device can dump a large volume of water from its relief valve. Without a drain or pump hole, there is real water-damage liability.
  • Clearance and access. The device needs working room around it and height off the floor. The annual test also needs access, which may mean disrupting tenants or occupants.
  • Shutdown during testing or repair. Water to the building is interrupted, which is harder to schedule around when the device is inside an occupied space.
  • Leak damage. Any leak or failure happens over finished floors and finishes rather than outside.

Outdoor: pros

  • Discharge goes outside. There’s no interior flood risk.
  • Easy access. Testers and the water utility can reach the device without entering the building, with no disruption to tenants or occupants.
  • Fewer clearance problems. It’s easier to meet code clearances, and it often satisfies utilities that want the device near the meter or property line.
  • Simpler retrofits. There’s less interior piping and construction.
  • Frees up interior space. No mechanical room footprint is needed.

Outdoor: cons

  • Freeze risk. In cold climates, the device needs an insulated, heated enclosure (often with heat trace), which adds installation and ongoing electrical costs. Without one, freeze damage is a real possibility.
  • Theft and vandalism. The device is exposed, so theft is possible.
  • Weather and impact damage. Snow, ice, plows, mowers, and vehicles are all hazards.
  • Flooding and submersion. The device can’t sit in a pit or low spot that can fill with water, since that creates a cross-connection risk. It must be mounted above grade.
  • Appearance. Enclosures can be unsightly, and landscaping may be needed to hide them.
  • Winter testing and repair. Work is less pleasant, and sometimes harder, in cold or wet weather.

The bottom line: In the Northeast, location depends on use. Seasonal devices, such as those on irrigation or summer water systems, are typically installed outdoors and removed or drained before freezing weather. Year-round devices, such as those on fire systems, are generally installed indoors or in heated enclosures to prevent freeze damage.

View All of Our

Plumbing Services

HOURS

Mon-Fri: 8:00AM - 4:30PM

CONTACT

Call: 207-216-3333 Text: 207-216-3333

EMERGENCIES

If you have a plumbing emergency after hours or on weekends, please call and leave a message.

As a family business, we understand that plumbing emergencies don't follow a schedule. We'll get back to you as quickly as possible and do everything we can to help.

Often, we can talk you through steps to get you out of crisis mode so your job can be scheduled during normal business hours, saving you costly emergency fees!

Agamenticus Plumbing logo
Voted Best of the Best in Kitterys/Yorks 4 years running
Read Our Clients' Reviews
Maine Master Plumber License #MS90015283
Plumbing Policies